RssYouTubeLinkedInXFacebook

Additional Hand Held Hole Digger Parts

  • 240-0080 Throttle Cable

    240-0080 Throttle Cable

    $20.02 $18.02

    Features/Benefits:

    • Crush resistant, flexible conduit with tough, abrasion resistant cover to prevent damage & keep dirt out
    • Plated, swaged on end fittings prevent corrosion & keep your connections secure
    • Die cast cable end ball & slug for precision fit to throttle control, engine & will not separate from the cable
    • Comes ready to install, pre-lubricated, no cutting or stripping required
    Add to cart Details
  • 240-0100 new product

    240-0100PAK2 Transmission Gasket

    $18.54 $16.69

    Features/Benefits:

    • Precision die cut, accurate fit for a no-fuss installation & reduced downtime
    • Gasket forms an integral seal, preventing engine oil leaks from the transmission
    • Resists water, oil & fuel to prevent seal degradation & improve gasket lifespan
    Add to cart Details
  • 240-0160 left face 240-0160 right face

    240-0160 Clutch Drum

    $59.53 $53.58

    Features/Benefits:

    •  Heat treated steel alloy drum & pinion shaft for increased wear & service life
    • Precision centered & brazed pinion shaft for smooth clutch operation & low vibration
    Add to cart Details
  • 240-0170 front face 240-0170 right face

    240-0170 Clutch Rotor/Shoe Assembly

    $59.40 $53.46

    Features/Benefits:

    • Engineered for proper shoe to drum engagement at specified RPM for consistent, effective performance
    • Properly slips when digging obstructions are encountered to reduce kickback & increase operational safety
    • Directional arrows ensure correct installation & proper operation
    Add to cart Details
  • 240H-0080

    240H-0080PAK2 Throttle Cable

    $40.05 $36.05

    Features/Benefits:

    • Comes ready to install with all fittings, lock nuts, pre-lubricated & no additional prep required
    • Die cast cable end ball & slug for precision fit to throttle control, engine & will not separate from the cable
    • Crush resistant, flexible conduit with tough, abrasion resistant cover to prevent damage & keep dirt out
    • Plated, swaged on end fittings prevent corrosion & keep your connections secure
    Add to cart Details
  • 240H-0350 front face 240H-0350 right face

    240H-0350PAK2 ON/OFF ENGINE SWITCH

    $18.68 $16.81

    Features/Benefits:

    • Easy turn knob requires low force to activate
    • Molded in stops prevent knob over rotation & damage to the switch
    • Clearly marked ON/OFF switch positions for safe equipment operation
    • Pre-wired, molded in wire lead with bullet style connector for fast, easy hookup to the engine
    Add to cart Details
  • 310-0020-030

    310-0020-030-A THROTTLE TUBE & GRIP ASSEMBLY

    $21.67 $19.50

    Features/Benefits:

    • Soft rubber & molded-in grid pattern provide excellent grip quality for improved operational safety
    • End flairs help keep your hand centered, off the throttle control housing & from slipping off the grip
    Add to cart Details
  • 310-0030 left face 310-0030 right face

    310-0030 THROTTLE CONTROL ASSEMBLY

    $92.74 $83.47

    Features/Benefits:

    • Rugged, polycarbonate assembly designed to perform in dirty, abusive, unforgiving work environments
    • Posi-grip throttle control prevents hand from slipping for safe operation
    • Soft rubber cable boot allows cable flex & keeps dirt out
    • Internal idler pulley/cable design provides extremely easy, low force throttle control rotation
    • Simple screwdriver throttle control & cable replacement capability saves time & money
    Add to cart Details
  • 310-0081

    310-0081PAK2 Throttle Cable

    $69.50 $62.55

    Features/Benefits:

    • Plated, swaged on end fittings prevent corrosion & keep your connections secure
    • Crush resistant, flexible conduit with tough, abrasion resistant cover to prevent damage & keep dirt out
    • Comes ready to install, pre-lubricated, no additional prep required
    • Die cast cable end ball for precision fit to throttle control & will not separate from the cable
    Add to cart Details
  • 310-0101 new product

    310-0101PAK2 Transmission Gasket

    $32.13 $28.92

    Features/Benefits:

    • Resists water, oil & fuel to prevent seal degradation & improve gasket lifespan
    • Precision die cut, accurate fit for a no-fuss installation & reduced downtime
    • Gasket forms an integral seal, preventing engine oil leaks from the transmission
    Add to cart Details
  • 330-0070 open end 330-0070

    330-0070 Handle Grip

    $9.95 $8.96

    Features/Benefits:

    • Textured, full length ribs & small end flairs provide increased grip control & minimal slippage
    Add to cart Details
  • 330H-0175 left face 330H-0175 right face

    330H-0175 Clutch Rotor/Shoe Assembly

    $98.66 $88.79

    Features/Benefits:

    • Plated rotor housing prevents corrosion & increases service life
    • Keyed, set screw design holds assembly firmly in place on engine crank shaft for uninterrupted operation
    • Engineered for rapid engagement at low inertia starts for zero lag time & optimum productivity
    • Properly slips when digging obstructions are encountered to reduce kickback & increase operational safety
    Add to cart Details
  • 332-0100PAK2 Transmission Gasket

    332-0100PAK2 TRANSMISSION GASKET

    $30.25 $27.23

    Features/Benefits:

    • Prevents oil leaks between transmission cover & housing, no additional sealants required
    • Die cut for precision fit & hassle-free installation saving time & money
    • Water, oil & fuel resistant material resists seal degradation increasing gasket service life
    Add to cart Details
  • 332-0101PAK2 Transmission Gasket

    332-0101PAK2 TRANSMISSION GASKET

    $30.25 $27.23

    That slippery stuff oozing out all over your pretty orange digging machine from between the transmission cover and housing isn’t from spilling your morning coffee. Guess again. Either the bolts holding everything together are loose or the gasket may be past its prime. The more oil you lose, the greater chance you have of overheating and wrecking that heavy duty spur gear transmission that purrs like a dream on command.  Duct tape won’t fix it. Grab a gasket and get it done.

    Features/Benefits:

    • Gasket forms critical seal between transmission cover & housing preventing oil leaks
    • Material composition increases gasket service life resisting water, oil & fuel seal degradation
    • Die cut for precision fit & hassle-free installation saving time & money
    Add to cart Details
  • 3516 inside right 3516 right view

    3516 Clutch Drum & Pinion Assembly

    $96.63 $86.97

    Features/Benefits:

    • Heat treated steel alloy drum & pinion gear for increased wear & service life
    • Precision centered & brazed pinion gear for smooth clutch operation & low vibration
    • Self-lubricating, bronze bushing prevents binding & reduces component wear
    Add to cart Details

Call Sales at – 1.800.533.0524 or Contact Us

General Equipment Company
0
    0
    Your Cart
    Your cart is empty
    Secure Checkout
    Fast Shipping
    Easy Returns
    To find out your shipping cost , Please proceed to checkout.
    Continue Shopping
    General Equip Company uses cookies and other technologies to enhance your website experience, to display customized content in accordance with your browser settings and to help us better understand how you use our website among other types of information. By continuing to browse our website or clicking “ok”, you indicate your agreement with our Privacy and Cookie Policies. To learn more about these policies, your rights, and how to manage cookies, please read our Privacy Policy and Cookie Policy.
    Ok
    Go to Top