$273.00
$245.70
Features:
30 to 40 grit, white identification color, stamped “W” on pin shank. General purpose, Omnitrix™ matrix formula delivers balanced productivity rates versus service life for both cured and green concrete, epoxies, urethanes and other, high abrasive-type materials. Usually preceded by the use of the SG24-2105 DIAM-A-TACH Grinding Block. 2.4 square inches nominal surface area per block. 0.45 inch nominal segment thickness. Includes SG24-1800 wedge, each.
40 to 50 grit, silver identification color, stamped “S” on pin shank. For removing rough swirl marks and normal grinding patterns from concrete and similar type surfaces prior to applying sealers, stains or preparing for diamond polishing. 2.4 square inches nominal surface area per block. Usually preceded by the use of the SG24-2106 DIAM-A-TACH Grinding Block. 0.45 inch nominal segment thickness. Includes SG24-1800 wedge, each.
| Specifications | |
|---|---|
| Operating Environment |
Non-hazardous type locations |
| Performance/Applications |
This is the factory replacement diamond segment pin for the SG24-2105 DIAM-A-TACH™ grinding attachment. Medium to aggressive material removal rates removing up to .125 inch of material thickness. General surface grinding, removal of trowel marks, high spots, rough sections plus, urethanes, high tensile epoxies and many thin-film coatings such as thinsets, mastics and waterproofing plus, other high-abrasive type materials. |
| Surface Material |
Green & cured concrete with soft to abrasive aggregate |
| Finish/Profile | Produces medium to heavy swirl marks |
| Service Life |
As part of an SG24-2105 attachment, up to 215 hours dependent on surface material properties, job application requirements among other factors. Call for technical assistance assessing your job application requirements, no obligation required. We are here to make you successful. |
|
Concrete Surface Profile (CSP) |
1-2 |
|
Attachment Method |
Roll pin |
|
Pins Per SG24-2105 Attachment |
3, replaceable |
|
Grit Size |
30 to 40 |
|
Grinding Area Per Segment |
0.79 inches2 (507.3 mm2) |
|
Grinding Segment Dimensions (L x W x H) |
1.0 x 1.0 x 0.45 inches (25.4 x 25.4 x 11.4 mm) |
|
Pin Color |
White |
|
Pin Dimensions (L x W x H) |
2.0 x 1.13 x 1.13 inches (50.8 x 28.7 x 28.7 mm), single pin |
|
Product Weight |
0.4 lbs (0.18 kg), pack of 1 |
|
Pins Per Pack |
1 (Includes o-ring & roll pin) |
|
Compatible Product |
SG12E, SG24E, SG24E3HP50, SG24E3HP60, SG24GH Legacy Series plus, competitive configured surface grinders, SG24-2105 DIAM-A-TACH™ grinding attachment |
|
|
|
